Scottish Bog Oak Wood Blank for Sgian Dubh handle, woodworking blank, woodturning blank, woodcarving blank

This wood blank is Scottish Bog Oak. I have been very aware of this materials existence for some time now but have been waiting to secure the right piece. This particular piece came from Muir of Clunes, 12 miles South West of Inverness. This is quite a rural, verdant and quite thickly wooded part of Scotland. My contact for this wood excavated quite a few pieces and had a very small section scientifically aged, it came back at approximately 5000 years old! To put this into context, this is when, slightly further down the road, Stonehenge was starting to be assembled. Bog Oak is created when the tree is buried in a peat bog and the wood is preserved by the acidic conditions. The wood is stained dark brown to black by the tannins in the acidic water. There is a fair amount of wastage of the wood until you get deeper into the piece. In its raw state it smells like a mix of rubber and organic material, not in any way rotten or decomposed. Working the wood is somewhat challenging, quite splintery very much like Snakewood or Ebony and is number 80 in my list of worked Hardwoods. Finished, the wood is at least as hard as fresh Oak and finishes to a fine lustre. Colour is predominately black with dark brown that has a deep iridescence and looks almost identical to Indian Ebony. As far as the ultimate Scottish Sgian Dubh wood (black wood), this is pretty much it although it does have the monopoly on colour as no other Scottish wood is quite so dark.
I have removed all waste wood, this wood blank is 100% usable Grade A wood. Sand the end grain edges whilst working to stop splintering.
The blank in the photos is the one you will receive and measures:
Length 151mm x Width 47mm x Depth 24mm